翠宏山铁多金属矿床成矿流体包裹体及硫同位素特征   总被引：1，自引：0，他引：1  

杜美艳  李超  杨乃峰  孙珍军  王春光  于赫楠 《世界地质》2011,30(4):538-543

对翠宏山铁多金属矿床成矿早期阶段钨钼矿体中的石英、成矿晚期阶段铅、锌、铜矿体中的萤石流体包裹体特征及均一温度、盐度的研究表明,从早期钨钼成矿阶段至晚期铅、锌、铜成矿阶段,侵入体内接触带至外接触带,经历了一个温度剧降和盐度显著增加的过程。钨钼成矿阶段成矿流体主要为岩浆热液流体,成矿过程为单一的成矿流体冷却过程; 在晚期铅、锌、铜成矿阶段,来自岩浆中的温度较高的热流体与围岩地层中的大气降水等低温、高盐度流体混合,使成矿流体温度剧降和盐度增高,导致铅、锌、铜等成矿物质的沉淀。辉钼矿和方铅矿的δ34S ( × 10-3 ) 测试结果表明,侵入体内接触带钨钼矿体的成矿物质主要来自岩浆热液; 围岩地层中铅、锌、铜矿体的成矿物质,除岩浆热液来源外,部分可能来自雨水对地层中硫酸盐岩中硫及其他成矿物质的淋滤。  相似文献   

基于Biot-Gassmann 方程的流体替换技术在番禺天然气区PY 气田的应用     

轩义华  袁立忠  汪瑞良  秦成岗  金志臻 《世界地质》2011,30(1):60-64

珠江口盆地番禺天然气区PY 气田位于坡折带上,特殊的沉积环境导致该气田已钻探的各井 T50 储层泊松比关系异常,含油气性特征非常复杂。为更好的判断储层的含油气性,利用Biot-Gassmann 方程对坡折带储层的流体性质进行了替换,考查不同流体性质下储层的含油气响应特征。研究结果表明: Biot-Gassmann 方程能有效的用于坡折带储层的流体替换研究; 坡折带T50 储层含水和含气时的AVO 响应特征相近,但两者响应的幅值不同,含水砂岩的幅值更小。  相似文献   

Surface gravity wave interaction with elastic bottom     

S.C. MohapatraT. Sahoo 《Applied Ocean Research》2011,33(1):31-40

In the present paper, a hydroelastic model is developed to deal with surface gravity wave interaction with an elastic bed based on the small amplitude water wave theory and plate deflection in finite water depth. The elastic bottom bed is modelled as a thin elastic plate and is based on the Euler-Bernoulli beam equation. The wave characteristics in the presence of the elastic bed is analyzed in both the cases of deep and shallow water waves. Further, the linearized long wave equation is generalized to include bottom flexibility. A generalized expansion formula for the velocity potential is derived to deal with the boundary value problems associated with surface gravity waves having an elastic bed. The utility of the expansion formula is illustrated by demonstrating specific physical problems which will play significant role in the analysis of wave structure interaction problems. Behavior of the wave spectra are discussed in the case of closed basin having a free surface and an elastic bottom topography.  相似文献   

Hydrodynamic and dynamic analysis to determine the directional stability of an underwater vehicle near a free surface     

O. SaoutP. Ananthakrishnan 《Applied Ocean Research》2011,33(2):158-167

A theoretical methodology to determine the open-loop directional stability of a near-surface underwater vehicle is presented. It involves a solution of coupled sway and yaw equations of motion in a manner similar to that carried out for surface ships. The stability derivatives are obtained numerically through simulation of motions corresponding to planar motion mechanism (PMM) model tests. For the numerical simulation, a boundary-integral method based on the mixed Lagrangian-Eulerian formulation is developed. The free-surface effect on the vehicle stability is determined by comparing the results with that obtained for vehicle motion in infinite fluid. The methodology was used to determine the stability of the Florida Atlantic University’s Ocean EXplorer (OEX) AUV. The presence of the free surface, through radiation damping, is found to suppress unsteady oscillations and thereby enhance the directional stability of the vehicle. With effects of free surface, forward speed, location and geometry of rudders, location of the center of gravity etc. all being significant factors affecting stability, a general conclusion cannot be drawn on their combined effect on the vehicle stability. The present computational methodology is therefore a useful tool to determine an underwater vehicle’s stability for a given configuration and thus the viability of an intended mission a priori.  相似文献   

山西省落家河铜矿地质特征及矿床成因浅析     

孙桂琴  霍卫民 《化工矿产地质》2011,(4):232-238

落家河矿田位于中条三叉裂谷南东支的落家河构造剥蚀天窗内,该区域位于线性构造和弧形构造的交叉部位,是成矿有利部位.落家河矿区赋矿岩性为新太古界绛县群宋家山组绿泥片岩和变细碧岩.宋家山组一套钠质中基—中酸性火山凝灰岩夹正常沉积钙质副变质岩组成.经变质后的绿片岩层是主要找矿层位,特别是该岩层沿走向或倾向变化大和膨胀部位.硅化...  相似文献   

MVT铅-锌矿床的地球化学研究方法及其成矿系统探讨     

周灵洁  张正伟  张中山  游富华 《矿物岩石地球化学通报》2011,30(2):223-233

本文总结MVT铅-锌矿床的最新地球化学研究方法及研究成果,包括δ18O、87Sr/86Sr、δ34S、206Pb/204Pb、Cl/Br、δ44Ca、同位素定年,以及利用地球化学参数所进行的数值模拟等。以这些方法的研究成果为依据,结合对白云石化作用和有机质在成矿系统中作用的分析,深入探讨了MVT铅-锌矿床的成矿系统,总结出一个与有机质密切相关的流体混合成矿假说。另外,强调了最新研究成果——金属硫化物和脉石矿物相异的流体包裹体成分,将在今后成矿系统的研究中发挥重要作用。  相似文献   

宜川—旬邑地区长6～长8储层流体包裹体特征及意义   总被引：1，自引：0，他引：1  

田亚铭  施泽进  宋江海  齐亚林  吴晓明  高翔  邹永东 《矿物岩石地球化学通报》2011,30(1):80-87

宜川—旬邑地区显示油气丰富,但是实际勘探效果不佳,通过宜川-旬邑地区延长组长6~长8储层流体包裹体岩相、均一温度、盐度的研究表明,该区主要发育液烃包裹体和气液烃有机流体包裹体。流体包裹体主要分布在石英次生加大边与石英颗粒裂纹、方解石胶结物和裂缝充填物中;包裹体个体多为5~15μm,均一温度为49~127℃,平均89℃。80%以上样品的含油流体包裹体丰度(GOI)大于或等于1%,其中近40%样品的GOI在5%以上。流体包裹体总体偏向低盐度,包裹体盐度与均一温度间的相关性差。结合延长组成岩作用、热史和埋藏史分析指出,延长组发生过广泛的油气运移与充注事件,充注时间主要在早白垩世早期—早白垩世晚期;油藏具储层边致密、石油边成藏的特点,受后期构造运动的影响,原始封闭体系遭到破坏,在方解石胶结物不甚发育且原生粒间孔隙保存较好的区域,有望获得油气勘探的突破。  相似文献   

He–Ar Isotope Composition of Pyrite and Wolframite in the Tieshanlong Tungsten Deposit,Jiangxi, China: Implications for Fluid Evolution     

Guanglai LI  Renmin HUA  Wenlan ZHANG  Dongquan HU  Xinglin WEI  Xiao'e HUANG  Lei XIE  Junming YAO  Xudong WANG 《Resource Geology》2011,61(4):356-366

The Tieshanlong tungsten‐polymetallic deposit is a large wolframite deposit of quartz vein type located in southern Jiangxi, South China. It is genetically related to a high‐K S‐type granite. Seven pyrite and two wolframite samples, selected for He and Ar isotope analyses, yielded ³He/⁴He values of 0.04–0.98 Ra, ⁴⁰Ar/³⁶Ar ratios of 293.5–368.0, and ³⁸Ar/³⁶Ar ratios of 0.176–0.193. These data indicate that the ore‐forming fluids associated with the deposit did not result from a simple mixing of the crustal‐ and mantle‐derived end‐member fluids, but that primeval meteoric fluids were also involved in the generation of the associated granitic magma by partial melting of crustal metasedimentary rocks. Further investigations show that only minimal He from the mantle was added during generation of the associated granitic magma. It is postulated that boiling and second mixing with “new” meteoric fluids took place during migration of magmatic‐hydrothermal fluids into wall‐rock fractures, resulting in a drastic decrease of their metal transport capacity, which triggered the tungsten‐polymetallic mineralization.  相似文献   

Formation of the Dongmozhazhua Pb–Zn Deposit in the Thrust‐Fold Setting of the Tibetan Plateau,China: Evidence from Fluid Inclusion and Stable Isotope Data     

YingChao LIU  ZengQian HOU  ZhuSen YANG  ShiHong TIAN  TianNan YANG  YuCai SONG  HongRui ZHANG  Emmanuel John M. CARRANZA 《Resource Geology》2011,61(4):384-406

The Dongmozhazhua deposit, the largest Pb–Zn deposit in south Qinghai, China, is stratabound, carbonate‐hosted and associated with epigenetic dolomitization and silicification of Lower–Middle Permian—Upper Triassic limestones in the hanging walls of a Cenozoic thrust fault system. The mineralization is localized in a Cenozoic thrust‐folded belt along the northeastern edge of the Tibetan plateau, which was formed due to the India–Asia plate collision during the early Tertiary. The deposit comprises 16 orebodies with variable thicknesses (1.5–26.3 m) and lengths (160–1820 m). The ores occur as dissemination, vein, and breccia cement. The main sulfide assemblage is sphalerite + galena + pyrite + marcasite ± chalcopyrite ± tetrahedrite, and gangue minerals consist mainly of calcite, dolomite, barite, and quartz. Samples of pre‐ to post‐ore stages calcite yielded δ¹³C and δ¹⁸O values that are, respectively, similar to and lower than those yielded by the host limestones, suggesting that the calcite formed from fluids derived from carbonate dissolution. Fluid inclusions in calcite and sphalerite in the polymetallic sulfidization stage mostly comprise liquid and gas phases at room temperature, with moderate homogenization temperatures (100–140°C) and high salinities (21–28 wt% NaCl eq.). Micro‐thermometric fluid inclusion data point to polysaline brines as ore‐forming fluids. The δD and δ¹⁸O values of ore fluids, cation compositions of fluid inclusions, and geological information suggest two main possible fluid sources, namely basinal brines and evaporated seawater. The fluid inclusion data and regional geology suggest that basinal brines derived from Tertiary basins located southeast of the Dongmozhazhua deposit migrated along deep detachment zones of the regional thrust system, leached substantial base metals from country rocks, and finally ascended along thrust faults at Dongmozhazhua. There, the base‐metal‐rich basinal brines mixed with bacterially‐reduced H₂S‐bearing fluids derived from evaporated seawater preserved in the Permo–Triassic carbonate strata. The mixing of the two fluids resulted in Pb–Zn mineralization. The Dongmozhazhua Pb–Zn deposit has many characteristics that are similar to MVT Pb–Zn deposits worldwide.  相似文献   

“Basin scale” versus “localized” pore pressure/stress coupling - Implications for trap integrity evaluation     

R. Mourgues  J.B. GressierL. Bodet  D. BureauA. Gay 《Marine and Petroleum Geology》2011,28(5):1111-1121

In petroleum industry, the difference between pore pressure (P_p) and minimum horizontal stress S_h (termed the seal or retention capacity) is of major consideration because it is often assumed to represent how close a system is to hydraulic failure and thus the maximum hydrocarbon column height that can be maintained. While S_h and P_p are often considered to be independent parameters, several studies in the last decade have demonstrated that S_h and P_p are in fact coupled. However, the nature of this coupling relationship remains poorly understood. In this paper, we explore the influences of the spatial pore pressure distribution on S_h/P_p coupling and then on failure pressure predictions and trap integrity evaluation. With analytical models, we predict the fluid pressure sustainable within a reservoir before failure of its overpressured shale cover. We verify our analytical predictions with experiments involving analogue materials and fluids. We show that hydraulic fracturing and seal breach occur for fluid pressure greater than it would be expected from conventional retention capacity. This can be explained by the impact of the fluid overpressure field in the overburden and the pressure diffusion around the reservoir on the principal stresses. We calculate that supralithostatic pressure could locally be reached in overpressured covers. We also define the retention capacity of a cover (RC) surrounding a fluid source or reservoir as the difference between the failure pressure and the fluid overpressure prevailing in shale at the same depth. In response to a localized fluid pressure rise, we show that the retention capacity does not only depend on the pore fluid overpressure of the overburden but also on the tensile strength of the cover, its Poisson’s ratio, and the depth and width of the fluid source.  相似文献